Page 2 of 3 FirstFirst 123 LastLast
Results 21 to 40 of 47
  1.    #21  
    Quote Originally Posted by Cantaffordit View Post
    and "demo" would have had the same processor. It would also probably have a tracking number carved into it. That's what we did when I worked for a computer hardware company years ago.
    no tracking numbers carved in - so no idea!
  2.    #22  
    Hi,

    Used impersonation to install 2.2.0 ROW

    Then installed uberkernel and govnah - and still same issue with max selectable speed in govnah is 1.024Ghz

    See screenshot

    Long way round to being in the same position as I was before

    Any ideas?

    Thanks
    Attached Images Attached Images
  3. Mize's Avatar
    Posts
    929 Posts
    Global Posts
    962 Global Posts
    #23  
    I'm guessing D1 is early (prototype) hardware that is frequency locked.
    Don't post your IMEI, but what's the serial number?
    Original Palm Pilot+modem > Kyocera QCP 6035 > Kyocera 7135 > Treo 650 > HTC TyTN (ugh) > Palm Centro > Nokia E75 > Nokia E72 + iPad2 > HP Veer + TouchPad + UK Pre3 + AT&T Pre3 > iPad2 + ATT Pre3 + Nokia N9 > Galaxy S3 > Pre3 > Nexus 4 > Blackberry Q10 + Galaxy Note 8.0
  4. #24  
    Did you try to install Uberkernal (now available for the Pre 3 on Preware)??

    If you install that, and you still get only the 1.2 ghz CPU max speed, then, you have a very rare unit, and likely an early hardware build - perhaps a mistaken shipment by HP when they were clearing out their inventory.

    At that point, you'll have to decide if you are a collector or a user. Being the former might pay off in the long run.
    "The more I learn, the more I realize just how little I really do know!" -Albert Einstein

  5. #25  
    Is it a prototype 1Ghz Dual Core Pre 3
    Can govnah detect a dual core cpu?

    How is the performance?
    The rumor said Pre 3 will have dual core.. Maybe hp plan it too, but it canceled due hp want to discontinue WebOS devices?

    -- Sent from my Palm Pre3 using Forums
  6. #26  
    Quote Originally Posted by tom.d.oliver View Post
    it should make it a uk phone - but only att webos doctor works - which would suggest it isn't

    was running uberkernel when it was eu 2.2.0, not running uberkernel with att 2.2.3

    Govnah gives same results either way round
    In this case UK refers to United Kingdom (england)
  7. #27  
    Mine shows:

    Code:
    Model: HSTNH-F30CN
    Hardware Version: A
    Firmware: MU2.0.30(3004)
    Carrier: ATT
  8.    #28  
    Quote Originally Posted by Mize View Post
    I'm guessing D1 is early (prototype) hardware that is frequency locked.
    Don't post your IMEI, but what's the serial number?
    serial number is MD1LECVA3008

    if hardware is frequency locked is there anyway around this?
  9.    #29  
    Quote Originally Posted by LCGuy View Post
    Did you try to install Uberkernal (now available for the Pre 3 on Preware)??

    If you install that, and you still get only the 1.2 ghz CPU max speed, then, you have a very rare unit, and likely an early hardware build - perhaps a mistaken shipment by HP when they were clearing out their inventory.

    At that point, you'll have to decide if you are a collector or a user. Being the former might pay off in the long run.
    uberkernel is intstalled and still can only select upto 1.024GHz

    Want to be both collector and user, i.e. would love to have something rare, but also for it to be as fast as it can be for usage
  10.    #30  
    Quote Originally Posted by The Bard View Post
    Is it a prototype 1Ghz Dual Core Pre 3
    Can govnah detect a dual core cpu?

    How is the performance?
    The rumor said Pre 3 will have dual core.. Maybe hp plan it too, but it canceled due hp want to discontinue WebOS devices?

    -- Sent from my Palm Pre3 using Forums
    performance is not fantastic, would expect it to be better than it is if it was dual core
  11. #31  
    Hi guys,

    I have the same problem on a Pre3 with Uberkenel for Pre3 from Preware installed. Can't chose higher than 1,024 Ghz.

    cat /proc/cpuinfo reveals only 511,18 Bogomips (how much do yours have?)
    uname -a reveals: Linux Pre3 2.6.32.9-palm-rib #2 PREEPT

    And hardware details are:
    VERSION: HP webOS 2.2.0
    MODEL: HSTNH-F30CE
    HARDWARE VERSION: A
    CARRIER: ROW (it's a German version judging by the keyboard)
    FIRMWARE: MU2.0.30(3500)

    As far as I read in the Uberkernel disclamer it only supports webOS 2.2.0 build 3171, so I suppose this might be a reason why we experience these problems.

    Thank's for the support.
  12. #32  
    [To the OP]

    What does /proc/version say?

    Also post a screenshot of the main scene of Govnah running on your device showing the name of the active kernel jn the top right corner.

    -- Rod
    Last edited by rwhitby; 11/09/2011 at 05:39 PM.
    WebOS Internals and Preware Founder and Developer
    You may wish to donate by Paypal to donations @ webos-internals.org if you find our work useful.
    All donations go back into development.
    www.webos-internals.org twitter.com/webosinternals facebook.com/webosinternals
  13. #33  
    "carrier":"ROW",
    "carrierROM":"Nova-WR-Mantaray-3171",
    "firmwareVersion":"MU2.0.30(3500)"
    "softwareVersion":"Nova-WR-Mantaray-3171"
    "deviceModel":"HSTNH-F30CE"
    "hardwareType":"mantaray","hardwareVersion":"A"
    "platform":"


    Here's my info

    My govnah profile always shows unknown



    -- Sent from my Palm Pre3 using Forums
  14. #34  
    I know this will be of little help but my AT&T Pre 3 had this issue one time in Govnah as well, but either a restart or an update to govnah or uberkernal seemed to fix it. Obviously, the OP has done more than that.

    Also, as far as determining whether it is UK or USA (ATT) isn't it as simple as checking the RAM because UK is 8 GB and USA is 16 GB, unless of course someone did some hardware work on it.

    As for the dual core possibility it has basically been confirmed that early on some spec sheets were incorrect and all the outlets ran with them without ever confirming.
    PDA Lineage: Palm Pilot, Palm V, Palm Tungsten, Treo 650 (Cingular), Treo 750 (AT&T), Treo Pro GSM (unlocked), Pre Plus (AT&T), Pre 2 GSM (unlocked), Pre 3 16GB (AT&T Branded) and Touchpad 32 GB
  15. #35  
    Quote Originally Posted by iulian View Post
    As far as I read in the Uberkernel disclamer it only supports webOS 2.2.0 build 3171, so I suppose this might be a reason why we experience these problems.
    If you're not running that build of 2.2.0, the kernel will not even install.

    I suspect both of you don't actually have the kernel installed and running, hence the request to see the main screen of Govnah, which I bet will say "Palm" instead of "UberKernel" in the top right corner.

    -- Rod
    WebOS Internals and Preware Founder and Developer
    You may wish to donate by Paypal to donations @ webos-internals.org if you find our work useful.
    All donations go back into development.
    www.webos-internals.org twitter.com/webosinternals facebook.com/webosinternals
  16. #36  
    Quote Originally Posted by rwhitby View Post
    If you're not running that build of 2.2.0, the kernel will not even install.

    I suspect both of you don't actually have the kernel installed and running, hence the request to see the main screen of Govnah, which I bet will say "Palm" instead of "UberKernel" in the top right corner.

    -- Rod
    Kernel was installed in running. After uninstalling it /proc/cpuinfo raised to 682 bogomips (x2 = 1,364 Ghz which is closer to 1,4 Ghz) When I was running the Uberkenel I only had 511,18 Bogomips (x2 = 1,022 Ghz which matched Govnah description)

    So from my point of view it's clearly that Uberkernel slows down my Pre3.

    Now I have the standard version of the Kernel and the phone is running a lot faster. I can reinstall UberKernel if you think this would help troubleshooting)
  17. #37  
    Quote Originally Posted by iulian View Post
    Kernel was installed in running. After uninstalling it /proc/cpuinfo raised to 682 bogomips (x2 = 1,364 Ghz which is closer to 1,4 Ghz) When I was running the Uberkenel I only had 511,18 Bogomips (x2 = 1,022 Ghz which matched Govnah description)

    So from my point of view it's clearly that Uberkernel slows down my Pre3.

    Now I have the standard version of the Kernel and the phone is running a lot faster. I can reinstall UberKernel if you think this would help troubleshooting)
    Post a screenshot of the main screen of Govnah running the kernel, and the output of Help -> Generate Email. Without that information, we have no way of knowing exactly what you are or are not running.

    -- Rod
    WebOS Internals and Preware Founder and Developer
    You may wish to donate by Paypal to donations @ webos-internals.org if you find our work useful.
    All donations go back into development.
    www.webos-internals.org twitter.com/webosinternals facebook.com/webosinternals
  18. #38  
    Quote Originally Posted by rwhitby View Post
    Post a screenshot of the main screen of Govnah running the kernel, and the output of Help -> Generate Email. Without that information, we have no way of knowing exactly what you are or are not running.

    -- Rod
    Here's the paste, but please not that as I've mentioned in my previous post, I've uninstalled UberKernel Pre3 and I do not have right now the time to reinstall and run it but I will do it later. Anyway, curiously Govnah still displays 1,024 Ghz.

    proc_version: Linux version 2.6.32.9-palm-rib (reviewdaemon@buildoe-16) (gcc version 4.3.3 (Sourcery G++ 4.3-234) ) #1 PREEMPT 155
    Current:
    From Service:
    Governor: ondemandtcl
    Scheduler: cfq
    Congestion: cubic
    min freq: 122.88 MHz
    max freq: 1.024 GHz
    sampling rate: 0.2 Sec
    up threshold: 95 %
    down differential: 3
    ignore nice load: false
    powersave bias: 0
    max tickle window: 3 Sec
    max floor window: 3 Sec
    compcache enabled: true
    compcache memlimit: 25 MB



    Files:
    cpufreq_filedescription "Govnah Settings"

    start on stopped finish

    script

    [ "`/usr/bin/lunaprop -m com.palm.properties.prevBootPanicked`" = "false" ] || exit 0
    [ "`/usr/bin/lunaprop -m com.palm.properties.prevShutdownClean`" = "true" ] || exit 0
    [ "`/usr/bin/lunaprop -m -n com.palm.system last_umount_clean`" = "true" ] || exit 0

    echo -n 'ondemandtcl' > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
    echo -n '122880' > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
    echo -n '1401600' > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
    echo -n '200000' > /sys/devices/system/cpu/cpu0/cpufreq/ondemandtcl/sampling_rate
    echo -n '95' > /sys/devices/system/cpu/cpu0/cpufreq/ondemandtcl/up_threshold
    echo -n '3' > /sys/devices/system/cpu/cpu0/cpufreq/ondemandtcl/down_differential
    echo -n '0' > /sys/devices/system/cpu/cpu0/cpufreq/ondemandtcl/ignore_nice_load
    echo -n '0' > /sys/devices/system/cpu/cpu0/cpufreq/ondemandtcl/powersave_bias
    echo -n '3000' > /sys/devices/system/cpu/cpu0/cpufreq/ondemandtcl/max_tickle_window
    echo -n '3000' > /sys/devices/system/cpu/cpu0/cpufreq/ondemandtcl/max_floor_window

    end script
    compcache_filedescription "Govnah CompCache Configuration"

    start on stopped finish
    stop on runlevel [!2]

    script

    [ "`/usr/bin/lunaprop -m com.palm.properties.prevBootPanicked`" = "false" ] || exit 0
    [ "`/usr/bin/lunaprop -m com.palm.properties.prevShutdownClean`" = "true" ] || exit 0
    [ "`/usr/bin/lunaprop -m -n com.palm.system last_umount_clean`" = "true" ] || exit 0

    swapoff -a
    insmod /lib/modules/`uname -r`/extra/xvmalloc.ko
    insmod /lib/modules/`uname -r`/extra/ramzswap.ko memlimit_kb=25600 backing_swap=/dev/mapper/store-swap
    sleep 3
    swapon /dev/ramzswap0 -p 1

    end script


    Profiles:
    (8) Profile 8
    Governor: screenstate
    min freq: 250 MHz
    max freq: 800 MHz
    CPU Voltage: 69 66 65 60 48 36 30
    temp limit: 55 C
    temp reset: 50 C
    batt low thresh: 25 %
    batt low speed: 500 MHz
    override charger: false
    compcache enabled: false
    compcache memlimit: 16 MB
    (9) Profile 9
    Governor: screenstate
    min freq: 250 MHz
    max freq: 800 MHz
    CPU Voltage: 67 64 63 58 46 34 28
    temp limit: 55 C
    temp reset: 50 C
    batt low thresh: 25 %
    batt low speed: 500 MHz
    override charger: false
    compcache enabled: false
    compcache memlimit: 16 MB
    (17) Profile 17
    Governor: ondemand
    min freq: 500 MHz
    max freq: 800 MHz
    sampling rate: 0.2 Sec
    up threshold: 80 %
    ignore nice load: false
    powersave bias: 0
    CPU Voltage: 69 66 65 60 48 36 30
    temp limit: 55 C
    temp reset: 50 C
    batt low thresh: 25 %
    batt low speed: 500 MHz
    override charger: false
    compcache enabled: false
    compcache memlimit: 16 MB
    (18) Screenstate 500/1000 v12
    Governor: screenstate
    min freq: 500 MHz
    max freq: 1 GHz
    (19) Screenstate 500/800 v12
    Governor: screenstate
    min freq: 500 MHz
    max freq: 800 MHz
    (20) Fixed Speed 800 v12
    Governor: performance
    min freq: 800 MHz
    max freq: 800 MHz
    (21) Fixed Speed 720 v12
    Governor: performance
    min freq: 720 MHz
    max freq: 720 MHz
    (22) Fixed Speed 600 v12
    Governor: performance
    min freq: 600 MHz
    max freq: 600 MHz
    (23) UberKernel Default v12
    Governor: userspace
    min freq: 125 MHz
    max freq: 1 GHz
    setspeed: 500 MHz
    (24) VDemand 1005 v12
    Governor: vdemand
    min freq: 1.005 GHz
    max freq: 1.005 GHz
    (25) Screenstate2 500/800 v12
    Governor: screenstate-v2
    min freq: 500 MHz
    max freq: 800 MHz
    (26) Screenstate 250/1100 v12
    Governor: screenstate
    min freq: 250 MHz
    max freq: 1.1 GHz
    (27) Screenstate2 500/1005 v12
    Governor: screenstate-v2
    min freq: 500 MHz
    max freq: 1.005 GHz
    (28) OnDemandTcl 1200 v13
    Governor: ondemandtcl
    min freq: 500 MHz
    max freq: 1.2 GHz
    (29) Warthog Default v12
    Governor: userspace
    min freq: 125 MHz
    max freq: 1.05 GHz
    setspeed: 500 MHz
    (31) Profile 31
    Governor: userspace
    min freq: 125 MHz
    max freq: 600 MHz
    setspeed: 500 MHz
    compcache enabled: true
    compcache memlimit: 10 MB
    (32) Palm Default v25
    Governor: ondemandtcl
    min freq: 122.88 MHz
    max freq: 1.4016 GHz
    sampling rate: 0.2 Sec
    up threshold: 95 %
    down differential: 3
    ignore nice load: false
    powersave bias: 0
    max tickle window: 3 Sec
    max floor window: 3 Sec
    (33) Profile 33
    Governor: userspace
    min freq: 122.88 MHz
    max freq: 1.024 GHz
    setspeed: 768 MHz
    compcache enabled: true
    compcache memlimit: 25 MB
    io scheduler: cfq
    (34) Profile 34
    Governor: powersave
    min freq: 122.88 MHz
    max freq: 1.024 GHz
    compcache enabled: true
    compcache memlimit: 25 MB
    io scheduler: cfq
    (35) Profile 35
    Governor: ondemandtcl
    min freq: 122.88 MHz
    max freq: 1.024 GHz
    sampling rate: 0.2 Sec
    up threshold: 95 %
    down differential: 3
    ignore nice load: false
    powersave bias: 0
    max tickle window: 3 Sec
    max floor window: 3 Sec
    compcache enabled: true
    compcache memlimit: 25 MB
    io scheduler: cfq
    (36) Demand
    Governor: userspace
    min freq: 122.88 MHz
    max freq: 1.024 GHz
    setspeed: 1.024 GHz
    compcache enabled: true
    compcache memlimit: 25 MB
    io scheduler: cfq
  19. #39  
    Quote Originally Posted by rwhitby View Post
    Post a screenshot of the main screen of Govnah running the kernel, and the output of Help -> Generate Email. Without that information, we have no way of knowing exactly what you are or are not running.

    -- Rod
    I have govnah set to UK default

    Here's the output



    proc_version: Linux version 2.6.32.9-palm-rib (v2.2.0-11@org.webosinternals.kernels.uber-kernel-pre3) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #2 PREEMPT Wed Nov 2 22:23:54 HST 2011
    Current:

    From Service:
    Governor: ondemandtcl
    Scheduler: cfq
    Congestion: cubic
    min freq: 122.88 MHz
    max freq: 1.4016 GHz
    sampling rate: 0.2 Sec
    up threshold: 95 %
    down differential: 3
    ignore nice load: false
    powersave bias: 0
    max tickle window: 3 Sec
    max floor window: 3 Sec
    compcache enabled: true
    compcache memlimit: 25 MB


    Files:

    cpufreq_file
    description "Govnah Settings"

    start on stopped finish

    script

    [ "`/usr/bin/lunaprop -m com.palm.properties.prevBootPanicked`" = "false" ] || exit 0
    [ "`/usr/bin/lunaprop -m com.palm.properties.prevShutdownClean`" = "true" ] || exit 0
    [ "`/usr/bin/lunaprop -m -n com.palm.system last_umount_clean`" = "true" ] || exit 0

    echo -n 'ondemandtcl' > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
    echo -n '122880' > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
    echo -n '1401600' > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
    echo -n '200000' > /sys/devices/system/cpu/cpu0/cpufreq/ondemandtcl/sampling_rate
    echo -n '95' > /sys/devices/system/cpu/cpu0/cpufreq/ondemandtcl/up_threshold
    echo -n '3' > /sys/devices/system/cpu/cpu0/cpufreq/ondemandtcl/down_differential
    echo -n '0' > /sys/devices/system/cpu/cpu0/cpufreq/ondemandtcl/ignore_nice_load
    echo -n '0' > /sys/devices/system/cpu/cpu0/cpufreq/ondemandtcl/powersave_bias
    echo -n '3000' > /sys/devices/system/cpu/cpu0/cpufreq/ondemandtcl/max_tickle_window
    echo -n '3000' > /sys/devices/system/cpu/cpu0/cpufreq/ondemandtcl/max_floor_window
    echo -n '368640' > /sys/devices/system/cpu/cpu0/cpufreq/ondemandtcl/screen_off_max_freq
    echo -n '0' > /sys/devices/system/cpu/cpu0/cpufreq/ondemandtcl/screenstate_enable

    end script

    compcache_file
    cat: can't open '/var/palm/event.d/org.webosinternals.govnah-compcache': No such file or directory


    Profiles:

    (1) OnDemandTcl 1400 v12
    Governor: ondemandtcl
    min freq: 150 MHz
    max freq: 1.4 GHz
    (2) OnDemandTcl 1200 v13
    Governor: ondemandtcl
    min freq: 300 MHz
    max freq: 1.2 GHz
    (3) OnDemandTcl 1100 v22
    Governor: ondemandtcl
    min freq: 150 MHz
    max freq: 1.1 GHz
    (4) Screenstate2 300/1200 v18
    Governor: screenstate-v2
    min freq: 300 MHz
    max freq: 1.2 GHz
    (5) Screenstate3 1100 v24
    Governor: screenstate-v3
    min freq: 150 MHz
    max freq: 1.1 GHz
    (6) Screenstate3 300/1100 v17
    Governor: screenstate-v3
    min freq: 300 MHz
    max freq: 1.1 GHz
    (7) F104A Default v17
    Governor: ondemandtcl
    min freq: 300 MHz
    max freq: 1.1 GHz
    sampling rate: 0.2 Sec
    up threshold: 40 %
    ignore nice load: false
    powersave bias: 0
    max tickle window: 3 Sec
    max floor window: 3 Sec
    (8) Palm Default v12
    Governor: ondemandtcl
    min freq: 150 MHz
    max freq: 1 GHz
    sampling rate: 0.2 Sec
    up threshold: 40 %
    ignore nice load: false
    powersave bias: 0
    max tickle window: 3 Sec
    max floor window: 3 Sec
    (9) OnDemandTcl 1901 v37
    Governor: ondemandtcl
    min freq: 122.88 MHz
    max freq: 1.9008 GHz
    (10) OnDemandTcl 1805 v37
    Governor: ondemandtcl
    min freq: 122.88 MHz
    max freq: 1.8048 GHz
    (11) OnDemandTcl 1728 v31
    Governor: ondemandtcl
    min freq: 192 MHz
    max freq: 1.728 GHz
    (12) OnDemandTcl 1690 v37
    Governor: ondemandtcl
    min freq: 122.88 MHz
    max freq: 1.6896 GHz
    (13) OnDemandTcl 1537 v37
    Governor: ondemandtcl
    min freq: 122.88 MHz
    max freq: 1.5366 GHz
    (14) A1 Default v42
    Governor: ondemandtcl
    min freq: 122.88 MHz
    max freq: 1.4016 GHz
    sampling rate: 0.2 Sec
    up threshold: 95 %
    down differential: 3
    ignore nice load: false
    powersave bias: 0
    max tickle window: 3 Sec
    max floor window: 3 Sec
    screen off max freq: 368.64 MHz
    screenstate enable: false
    (15) UberKernel Default v42
    Governor: ondemandtcl
    min freq: 122.88 MHz
    max freq: 1.4016 GHz
    sampling rate: 0.2 Sec
    up threshold: 95 %
    down differential: 3
    ignore nice load: false
    powersave bias: 0
    max tickle window: 3 Sec
    max floor window: 3 Sec
    screen off max freq: 368.64 MHz
    screenstate enable: false
    (16) Palm Default v42
    Governor: ondemandtcl
    min freq: 122.88 MHz
    max freq: 1.4016 GHz
    sampling rate: 0.2 Sec
    up threshold: 95 %
    down differential: 3
    ignore nice load: false
    powersave bias: 0
    max tickle window: 3 Sec
    max floor window: 3 Sec






    -- Sent from my Palm Pre3 using Forums
  20. #40  
    Uninstall and reinstall Govnah, *then* post the requested info.

    -- Rod
Page 2 of 3 FirstFirst 123 LastLast

Tags for this Thread

Posting Permissions