Results 1 to 4 of 4
  1.    #1  
    You need a WM device with Wifi (Im using Treo 750 WM6 with SpecTec Wifi)

    1) Setup the Windows phone as follows:

    a) Go to Wireless Manager
    b) Goto MENU | Wifi Settings. Select the network adaptors tab, choose WORK, and select your Wifi card (should be obviously named)
    c) Manualy set an IP address, lets use 192.168.2.2 Then click in netmask and let it auto-fill with 255.255.255.0
    d) Go back to the Wireless tab, and select NEW network (make sure the option to show both fixed and adhoc networks is selected).
    e) Name the network whatever you want. I called it 'iPod'. Then tick 'This is a device-to-device (adhoc)' option. Hit 'Next'
    f) Turn off data encryption. You CAN use it, but it makes things more complex, and only 1 device can connect to this network anyway so nobody else will be able to use it.
    g) Hit next and finish. You should see the network name appear with 'Connecting'. It will sit there untill you finish the client side before it says connected.

    2) Configure the Internet connection sharing.

    a) Run Internet sharing on your device, select 'Bluetooh PAN' and check the box below shows your GPRS data connection.
    b) Open on (WM Device) Registry Editor and go to 'HKLM\Comm\ConnectionSharing\PrivateInterface=BTPAN1'
    c) Change 'PrivateInterface=BTPAN1' to 'TIACXWLN1', Ok and save this. Exit the registry editor.

    3) Configure the WiFi settings on your iPod/iPhone.

    a) From the home page tap 'Settings' then 'Wifi' then 'Turn on WiFi'.
    b) Select your new 'iPod' network from the list. Wait a few seconds. It should connect. I had to specify Static IP address as:
    IP Address: 192.168.2.3
    Subnet Mask: 255.255.255.0
    Router: 192.168.2.2
    DNS: Put in your DNS (66.209.10.201 for Cingular/AT&T Wireless)

    c) Press the 'Home' button and open Safari. Go to a webpage. It should connect with no trouble. I occasionally got the message, 'Cannot connect to iPod'. Turning it off and on (rebooting) should fix this. If not, reboot the Windows phone also and start from scratch.
  2. #2  
    That's cool, what kind of battery life are you getting. Sucking more juice on a 750 than doing bluetooth DUN on the same phone.
  3. PSB22's Avatar
    Posts
    192 Posts
    Global Posts
    203 Global Posts
    #3  
    Dont' buy an iPhone, and use TCPMP plus iTunesAgent to sync music to the treo. This approach is also a lot cheaper!
  4. #4  
    Quote Originally Posted by PSB22 View Post
    Dont' buy an iPhone, and use TCPMP plus iTunesAgent to sync music to the treo. This approach is also a lot cheaper!


    Surur

Posting Permissions